car want stay running

1998 PONTIAC BONNEVILLE
242,752 MILES
Avatar
LESTERTHEBOSSONEAL
  • MEMBER
  • 5 POSTS
my car want run with out holding pedal down.its a 98 bonneville with no super charger. ive changed fuel pump.fuel pressure regulator.computer,coils,plugs wires,control module,mass airflow,idle air control valve...checked for vacuum leaks an there arent any,also changed pcv valve and egr an catalytic converter and o2 sensors im stuck
Aug 8, 2012 at 3:08 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Any codes?Also have you checked the coolant temp sensor?
Nov 5, 2018 at 7:09 PM
Avatar
LESTERTHEBOSSONEAL
  • MEMBER
  • 5 POSTS
No there are no codes an coolant temp sensor has been replaced already
Nov 5, 2018 at 7:09 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Have you used a fuel pressure gauge to see if your fuel pressure is leaking down to see if maybe the fuel is some how leaking into the engine causing it to flood?
Nov 5, 2018 at 7:09 PM
Avatar
LESTERTHEBOSSONEAL
  • MEMBER
  • 5 POSTS
Yea it had good pressure no leaks. Computer ecm.coils.plugs.wires.iac valve.mass airflow.o2 sensors.catalytic converter.intake plenum.vacuum lines.cleaned the throttle.pcv am housing.tested the injectors.crank sensor.control module an harness.fuel pump an regulator
Nov 5, 2018 at 7:09 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Do you have a scan tool that reads live engine data?
Nov 5, 2018 at 7:09 PM
Avatar
LESTERTHEBOSSONEAL
  • MEMBER
  • 5 POSTS
Yes didn't pull any codes or anything of concern just normal reading s
Nov 5, 2018 at 7:09 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
I know you replaced the coolant temp sensor but have you actaually compared the what the computer says for coolant temp with the actual coolant?To make sure its within 10 degrees all the way up till the radiator fan comes on?
Nov 5, 2018 at 7:09 PM
Avatar
LESTERTHEBOSSONEAL
  • MEMBER
  • 5 POSTS
Yes thermostat opens at right temp antifreeze is full and cmptr shows sensor properly reads
Nov 5, 2018 at 7:09 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Have you checked cam timing?
Nov 5, 2018 at 7:09 PM