how do i turn off my change oil now light

1998 OLDSMOBILE AURORA
150,000 MILES • V8 • FWD • AUTOMATIC
Avatar
LCARROLL1814
  • MEMBER
  • 7 POSTS
ive tried things with the brake petal with no luck
Dec 9, 2011 at 1:22 PM
Advertisement
Avatar
FACTORYJACK
  • CERTIFIED EXPERT
  • 4,159 POSTS
Is there a trip computer with a reset button? Scroll engine info to oil life, press and hold reset.
Dec 9, 2011 at 2:55 PM
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
Turn the key on and press the accelerator hard to the floor 3 times withing 5 seconds of turning the key on. Sometimes hitting it 4 times works better. If it doesn't reset, try again.
Dec 9, 2011 at 3:14 PM
Advertisement
Avatar
FACTORYJACK
  • CERTIFIED EXPERT
  • 4,159 POSTS
Oil Life Monitor Resetting


The engine oil life monitor will indicate when to change the engine oil usually between 5?000?km?(3,000?miles) and 12?000?km?(7,500?miles) since the last oil change. Under severe conditions, the CHANGE OIL massage may be displayed before 5?000?km?(3,000?miles). Never drive the vehicle more than 12?500?km?(7,500?miles) or 12?months, (whichever occurs first), without an oil change. The engine oil life monitor will not detect dust in the oil. If the vehicle is driven in a dusty area, be sure to change the oil every 5?000?km?(3,000?miles) or sooner if the CHANGE OIL message is displayed. Reset the oil life monitor when the oil has been change, use the following procedure.

Resetting Procedure


Follow this procedure to reset the engine oil life monitor:




1.

Turn the ignition to RUN.





2.

Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING.





3.

Press and hold the RESET button on the DIC switch for more than 5 seconds. The oil life will change to 100%. The engine oil life monitor is now reset.





4.

Turn the ignition OFF.
Dec 9, 2011 at 11:26 PM
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
I think it will reset either way.
Dec 9, 2011 at 11:54 PM