1998 Mitsubishi Lancer transmission

1998 MITSUBISHI LANCER
2WD • AUTOMATIC
Avatar
JUNIOR DUNCAN
  • MEMBER
  • 3 POSTS
i have no drive,park or reverse light on the dash board and the car is stuck in 3 gear can hardly go up and hill ......................what can cause that problem?
Dec 9, 2014 at 7:09 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
have a trans guy check this sounds like the trans is in limp mode so could be a switch or a rebuild may be needed.
Dec 9, 2014 at 7:27 AM
Avatar
JUNIOR DUNCAN
  • MEMBER
  • 3 POSTS
is there a specific switch that can cause that?
Dec 10, 2014 at 6:18 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
no there are many sensors and solenoids in a trans along with the wiring could be the problem.
Dec 10, 2014 at 7:14 AM
Avatar
JUNIOR DUNCAN
  • MEMBER
  • 3 POSTS
ok thanks just gonna get it scan
Dec 10, 2014 at 8:53 AM
Avatar
RLIMBITCO
  • MEMBER
  • 1 POST
change the Neutral safety switch or others call it inhibitor switch, it is located on top of the trans and it is where the end of your shifter cable is connected and then check the fuse that correspond to this.
Jun 5, 2019 at 12:40 PM