1998 Isuzu Hombre timing is off

1998 ISUZU HOMBRE
241,000 MILES
Avatar
98HOMBREPOS
  • MEMBER
  • 3 POSTS
went to start it this morning and the timing got knocked offset its a 2.2l line4 and im only running off 3 of the four cylinders how can I adjust the timing to get the 4th cylinder to fire again? I looked over the distributor and I cant figure out how to adjust it because from what it looks like its not a normal round distributor its two small ones with 2 plug wires running to each one. do I need to find out which cylinder is not firing and follow that plug wire back to the distributor to find out which one to adjust?
Aug 11, 2013 at 10:19 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
scan for codes first and check fuel pressure
Aug 11, 2013 at 10:22 AM
Avatar
98HOMBREPOS
  • MEMBER
  • 3 POSTS
ran the codes it came back with 7 codes some vaccume leaks and two random misfires detected what would be my best bet on what to try first
Aug 11, 2013 at 11:04 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
find the vacuum leaks and check your fuel pressure first then check battery for condition and load test.
Aug 11, 2013 at 11:05 AM
Avatar
98HOMBREPOS
  • MEMBER
  • 3 POSTS
what would I need to check fuel pressure and its a brand new duralast platinum battery I also have a stereo system in it with two p1 tens running off a 1200 watt amp
Aug 11, 2013 at 11:11 AM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
you need a fuel pressure gauge to check it and choke cleaner to find vacuum leaks. I really suggest you take this t o a professional to get this looked at so it wont cost you as much in time an dmoney from replacing wrong parts and installing aftermarket parts that are done incorrectly.
Aug 11, 2013 at 11:15 AM