GMC Suburban 1998

1998 GMC SUBURBAN
4WD • AUTOMATIC
Avatar
GERALYNVANHOUT
  • MEMBER
  • 1 POST
How do I get the driver's side airbag off so I can work behind it? The manual says to turn the steering wheel 90 degrees, insert a screwdriver into a release slot and the turn the wheel 180 degrees to release the rest. IT'S NOT WORKING!! Can you give some advise?
Mar 20, 2011 at 5:05 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
it's not easy to find if you don't do it enough.the slots are beind the wheel and use a small flat tip blade to push it in and release it. make ABSOLUTLEY sure the battery is disconnected when you do this. If not you'll get hurt andit will blow out he windshield. Also make sure not to turn the steering wheel shaft after removing the wheel as it will damage the sir ribbon under the wheel. when you push the blade in pull up on the airbag. there is one on each side and you just push it down when you put it back in.
Mar 22, 2011 at 11:43 PM