1998 GMC Jimmy Fuel Injector Spider Unit Bracket replacement

1998 GMC JIMMY
154,200 MILES • 4.6L • 2WD • AUTOMATIC
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
I replacing my central port spider injector unit for a standard port unit are the brackets compatible as for anything else that might be a issue? Thanks.
Jun 13, 2015 at 5:54 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
that engine never came with standard port injection unless you are talking about tbi. I or anyone else here would have no idea about the brackets unless we actually saw it or have done that switch
Jun 13, 2015 at 11:57 AM
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
I was referring to the spider unit with the injectors are connected to there is the CFI version and there's also a upgraded version they're both still like spiders. sorry for the confusion.
Jun 14, 2015 at 4:00 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
your pic didn't' come through but if you still haven't done it yet use the upgraded version of the spider unit. it has different poppet valves on it everything else should work ok. make sure to replace the o rings as well.
Jun 15, 2015 at 6:47 AM
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
Do you mean gaskets for plenum, throttle body, and top of spiders?
Jun 19, 2015 at 12:12 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
yes gaskets they are o rings but replace them as well.
Jun 19, 2015 at 12:47 PM
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
Thank you
Jun 19, 2015 at 1:18 PM
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
Another concern to know, I heard that once you put the poppit in for the new injector unit that you can take them out. Is that true?
Jun 24, 2015 at 1:12 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
only if you want to pay for new lines and poppets..... why would you
Jun 28, 2015 at 4:48 PM
Avatar
ROYCAR71
  • MEMBER
  • 359 POSTS
Sorry for confusion, the poppets for the new unit does come out if I did accidentally put the wrong one in. the car runs better thank you.
Jul 3, 2015 at 9:46 PM