replaced break light switch, as well as the terminals and checked fuse 9, no break/turning signal, or emergency lights. what next?!
Mar 2, 2012 at 2:30 AM
Advertisement
JACOBANDNICKOLAS
CERTIFIED EXPERT
110,175 POSTS
Check main fuses under the hood. Follow the wiring from the fuse back to see where power is lost.
Mar 2, 2012 at 2:58 AM
POSTERCHILD93
MEMBER
5 POSTS
What fuse would i want to follow?
Mar 2, 2012 at 5:39 AM
Advertisement
MERLIN2021
CERTIFIED EXPERT
17,250 POSTS
First, do your brake lights work? If yes then the shift interlock at the base of the steering column is malfunctioning. Or the wire from the stop light switch to the interlock is damaged.
Mar 2, 2012 at 8:41 PM
POSTERCHILD93
MEMBER
5 POSTS
No break lights/emergency/ or blinkers
Mar 2, 2012 at 9:37 PM
MERLIN2021
CERTIFIED EXPERT
17,250 POSTS
Ok if the brake lights dont work, niether will the interlock, so fix them first, and you will probably be able to shift check fuses 1 and 9, if ok, you will need to test and maybe replace the multifunction switch.
Mar 2, 2012 at 10:31 PM
MERLIN2021
CERTIFIED EXPERT
17,250 POSTS
fuses are shown below
Image (Click to enlarge)
Mar 2, 2012 at 10:34 PM
POSTERCHILD93
MEMBER
5 POSTS
Checked fuses, all good. Multifunction switch? Is that located by the fuse box? Yellow?
Mar 2, 2012 at 11:14 PM
MERLIN2021
CERTIFIED EXPERT
17,250 POSTS
No it's your turn signal lever.
Mar 3, 2012 at 2:25 AM
POSTERCHILD93
MEMBER
5 POSTS
So because my turning switch lever is broke my car is stuck in park and no break lights work or emergency lights?