put a new heater blowing switch on but there is still no heat blowing out
Dec 31, 2010 at 3:45 PM
Advertisement
JJSTOTT
MEMBER
2 POSTS
probably the resistor or you may have got water in your blower motor from the pollen filter try the resistor first, easy to do as is the blower itself
Dec 31, 2010 at 9:49 PM
JACOBANDNICKOLAS
CERTIFIED EXPERT
110,175 POSTS
Check to see if there is power to the blower motor. If there is, remove the blower motor and see if it runs with power directly to it. If it doesn't, replace the blower motor. If there is no power to the motor, check the blower motor resister and relay. NOTE: Make sure there is power to the new switch too. Check fuses.