Is there an easy way to replace Alternator

1998 CHRYSLER SEBRING
120,000 MILES
Avatar
MIAH61068
  • MEMBER
  • 8 POSTS
I have a 98 Chrysler Sebring coupe with a 2.5L. My alternator just quit on me. Im having ALOT of issues. cant even find where to losten the serpentine belt! then after thats off how are u supposed to get the alternator out and the replacement back in? So little room to work with!
May 30, 2012 at 6:04 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Hey MIAH61068,

Here is a guide and some diagrams to help you get the job done.

You will need to jack the car up and get under it

https://www.2carpros.com/articles/jack-up-and-lift-your-car-safely

and

https://www.2carpros.com/articles/how-to-replace-an-alternator


Please let us know what happens so it will help others.

Best, Ken
Images (Click to enlarge)
Attached Media
Attached Media
Jan 21, 2017 at 3:37 AM
Avatar
DEBORAH LEBLANC
  • MEMBER
  • 1 POST
need to replace alternator we need to know where the bolts are located
Jan 21, 2017 at 3:40 AM (Merged)
Advertisement
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
Hope the picture helps.

If you remove the oil filter and oil pressure switch, it may make it easier to get to lower generator bolt.
Image (Click to enlarge)
Attached Media
Jan 21, 2017 at 3:40 AM (Merged)
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
The info I gave you was for sebring convertible. If you have the coupe let me know, different info for coupe.
Jan 21, 2017 at 3:40 AM (Merged)
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
This is picture for the coupe.
Image (Click to enlarge)
Attached Media
Jan 21, 2017 at 3:40 AM (Merged)
Avatar
MIC2CAR
  • MEMBER
  • 1 POST
The most logical and practical way to remove this alternator
Jan 21, 2017 at 3:40 AM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Remove it through the bottom of the vehicle. Also, you can gain access to it through the inner fender (passanger side).
Jan 21, 2017 at 3:40 AM (Merged)