Error code P0112 & P1496

Before you think about replacing the computer you still have to check the connector wires etc.Do the codes come back as soon as you clear them.Do you have a scan tool that can read live engine data?

Yes, I have a scan tool, but I can not clear the codes with it. The live air intake temperature indicated by the scan tool is 127 degrees, regardless the sensor is connected or not.

Your going to have follow the harness back from the sensor and look for somewhere the wires are pinched/shorted together.Do you have a multimeter?

Yes, digital. I measured the voltage on the AIT connector and found 5 volts on one wire and 0.2 volts on the other one, with the engine running. I put a 4500 ohms resistor in series with the connector, but the voltage didn't dropped under 5 volts (4.9).

I posted the trouble tree for the code P0112 follow it and let me know what you find.

Thank you. I will try and come back with the result.

Your welcome keep me posted sorry about the multiple post my computer was acting up.

So, I did all you've sent me. The signal cable goes to pin 37 and the ground cable goes to pin 43 in PCM connector. The resistance is 0 in both cases, that means continuous cables. Between them there is no resistance, that means no short circuit.
I erased the error codes (engine stopped, key in ON position), and they reappeared instantly, without turning ON the engine.
Furthermore, last autumn my AC went crazy, it started by his own, without pushing the button. Since I didn't knew what to do, I removed the AC relay from the engine fuse box. Now I putted back, but the AC is no working anymore.
Bottom line, the defects in this moment are:
- codes P0112 & P1496
- AC not working
- engine stops and restarts randomly
So, I am almost sure that something is wrong with the PCM. What do you think?

Steps 5 6 and 7 lead you to a bad pcm diagnoses or not.

Yes, step 7 confirms.

If the wires and connections are good and there there not shorted looks like its the computer.Are you thinking about getting a used computer?

Yes, I found on eBay a refurbished one, and they make also the programming.

You just have to watch some of the new and refurbished ones need to be programed at the dealer.

Yes, I know. Unfortunatlly I am not from US, I am from Europe, and here they don't have support for Cirrus model. So I have to trust the seller. Maybe you know them

Thank you for your support and I like to make a fair donation to your site. Please tell me the right amount.

You can donate what ever you feel is fair.

The computer you posted the link to looks nice and they program to your car from your vin sounds like a good deal.

Hi,
I come back with the result. Changing the PCM solved the problem. Just for anyone to know. Best regards.

Glad to hear you got the problem resolved thats what we like to hear.Thank you for using 2carpros.

Good evening, I have the same problem. I will try another PCM.

Nice work, please let us know if you need anything else to get the problem fixed.