No fuel pressure pump isn't kicking on

Did you check at the fuel pump module for for power and ground to the fuel pump wires while cranking to start the engine.

no i haven't and not sure how to check that or what the result should be if i did

So you checked the actual fuel pressure and it reads 0psi?Thats how you know the fuel pump isnt working?Lets start with this go to the fuel pump fuse and see if there is power to both sides of the fuse while you are cranking the engine.Let me know what you find.

yes i checked the pressure and got nothing. i also poured gas down throttle body and truck ran fine for 1to2min.i will check the fuse when i get someone hear to help me because the only one i see is under the hood by the fuelpump relay
and i didn't find on in dashboard cluster

What is the 8th digit of your vin?Let me know so i can get you more info.

The 8th is 4. i still cannot figure it

The ecm B fuse should have power all the time then go to the connector at the fuel pump module unplug it.Then terminal C black wire should have 2ohms or less to ground.Then terminal B gray wire should have battery voltage while cranking.Also inspect the terminal ends make sure there not open.let me know what you find.