1998 Chevrolet S-10 4wd not working

1998 CHEVROLET S-10
185,000 MILES • 4.3L • V6 • 4WD • AUTOMATIC
Avatar
BRIANR84
  • MEMBER
  • 2 POSTS
I have 4x4 s10 and it's not engaging or doing anything. I checked fuse that I knew was 4wd fuse and it's good. The switch to put in 4 hi or 4lo and back to 2wd doesn't light up. So I order new switch still nothing I'm pretty sure it's electrical problem maybe tccm but not a mechanic need some help thanks
Sep 18, 2015 at 7:32 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
scan for codes first. might be the encoder motor on tcase
Sep 19, 2015 at 6:17 AM
Avatar
BRIANR84
  • MEMBER
  • 2 POSTS
I brought to oreillys the only code I had was O2 sensor nothing else
Sep 20, 2015 at 11:41 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
then check to see if encoder motor is getting power or not it may not be working. Otherwise a pro may need to scan it encoder motor is a high failure item but dont' buy it unless you are sure it's not working
Sep 20, 2015 at 11:45 AM