I need to know in what order does the pushrods go on my 1998 lumina 3.1 both front and back. Can I please get them in order from left to right.
Jan 13, 2012 at 10:02 PM
In what order does the pushrods go on a 1998 chevy lumina 3.1?
1998 CHEVROLET LUMINA
BRIANGSANOVAL
- MEMBER
- 12 POSTS
- FOLLOW
Advertisement
there is no certain order. just as long as you get the exaust pushrods with exaust vavles and intakes with intakes.
IMPORTANT: Place the valve train parts in a rack in order to ensure that they are installed in the same location from which they were removed. Intake pushrods
measure 144.18 mm (5.68 in) long. Exhaust pushrods measure 152.51 mm (6.0 in) long.
IMPORTANT: Use care when removing the pushrods. Ensure that they do not fall down into the lifter valley.
4. Remove the pushrods.
IMPORTANT: Place the valve train parts in a rack in order to ensure that they are installed in the same location from which they were removed. Intake pushrods
measure 144.18 mm (5.68 in) long. Exhaust pushrods measure 152.51 mm (6.0 in) long.
IMPORTANT: Use care when removing the pushrods. Ensure that they do not fall down into the lifter valley.
4. Remove the pushrods.
Jan 14, 2012 at 12:54 AM