how do i replace the blower motor it looks crazy ive replacaed a few but this one has me nervous
Feb 28, 2013 at 11:24 PM
1998 BUICK SKYLARK
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
1. Disconnect negative battery cable. On 3.1L engines, remove generator belt. Remove generator and set aside. On all mo
harness connector. Position engine wiring harness aside.
2. Cut blower motor case plastic cover on lines indicated on cover (about 7 o'clock to 5 o'clock position). DO NOT cut
Swing cut portion of cover down.
3. Remove cooling tube from blower motor. Remove blower motor mounting screws. Remove blower motor from vehicle. To
procedure. Use an insulating type sealant to secure blower case cover in place.
harness connector. Position engine wiring harness aside.
2. Cut blower motor case plastic cover on lines indicated on cover (about 7 o'clock to 5 o'clock position). DO NOT cut
Swing cut portion of cover down.
3. Remove cooling tube from blower motor. Remove blower motor mounting screws. Remove blower motor from vehicle. To
procedure. Use an insulating type sealant to secure blower case cover in place.
Mar 1, 2013 at 12:33 AM