cam alignment

1997 VOLVO 960
100,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
YOSHEY
  • MEMBER
  • 1 POST
I have a 97 volvo 960 that I am changing the head gasket. I have reinstalled the cams along with the top head. I then check the timing of the cam gears to the notches on the cam alighnment shroud and am off a bit should I be able to spin the cams by hand and get the correct alignment and if so how hard would it be.
Feb 26, 2011 at 8:10 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Engine is interference valves will contact pistons VOLVO warns DO NOT turn Cam or Crank without belt on. Need to set cams befroe install and #1 piston TDC
Image (Click to enlarge)
Attached Media
Feb 26, 2011 at 8:39 PM
Avatar
FLAGMAN12
  • MEMBER
  • 13 POSTS
You do not set the cams with # 1 cylinder at tdc, you must set the cams in accordance with the crankshaft timing mark.
Oct 28, 2017 at 12:56 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Great addition to this thread! Please feel free to help out whenever you are on the site :)

Cheers, Ken
Oct 30, 2017 at 12:19 PM