NO CRANK

1997 PLYMOUTH VOYAGER
1,790,000 MILES • V12 • 2WD • AUTOMATIC
Avatar
ANTLIVE77489
  • MEMBER
  • 7 POSTS
IT STILL HAS NO CRANK OR FIRE, I HAVE RAN A HOTT WIRE TO THE COIL WIRE(RED&GREEN)STILL NO CRANK, I HAVE CHANGED THE COMPUTER DOES THE NUMBER HAVE BE THE SAME ON IT?
Feb 6, 2011 at 4:20 PM
Advertisement
Avatar
OBXAUTOMEDIC
  • CERTIFIED EXPERT
  • 3,711 POSTS
Hello,

Ok, when you say "No Crank" do you mean it turns over fine just won't start? If so there is one sensor that is the most likely cause.

It is the Crank Shaft Position Sensor - it is located on the tranny bell housing.
Feb 6, 2011 at 4:36 PM
Avatar
ANTLIVE77489
  • MEMBER
  • 7 POSTS
WHERE IS THE TRANNY BELL HOUSING LOCATED
Feb 6, 2011 at 5:11 PM
Advertisement
Avatar
OBXAUTOMEDIC
  • CERTIFIED EXPERT
  • 3,711 POSTS
It is bolted to the rear of the engine.
Feb 6, 2011 at 5:49 PM
Avatar
OBXAUTOMEDIC
  • CERTIFIED EXPERT
  • 3,711 POSTS
The pic below indicate were the sensor is located. The first pic is for the 3.0L engine and the other pic is for both the 3.3L and 3.8L engine.

Images (Click to enlarge)
Attached Media
Attached Media
Feb 6, 2011 at 7:10 PM
Avatar
ANTLIVE77489
  • MEMBER
  • 7 POSTS
THANKS THAT WAS IT ..NOW ITS I HAVE A WATER COMING FROM THE FREEZE PLUG
Feb 6, 2011 at 10:39 PM
Avatar
OBXAUTOMEDIC
  • CERTIFIED EXPERT
  • 3,711 POSTS
No Problem.
Feb 10, 2011 at 1:25 AM