1997 Mercury Marquis Brake problem

1997 MERCURY MARQUIS
230,000 MILES • 4.6L • V8 • 2WD • AUTOMATIC
Avatar
FORE1NCE
  • MEMBER
  • 2 POSTS
Replaced the front brakes, rotors, & calipers and ended up with a soft brake pedal on start-up. Took it to a garage and had the master cylinder replaced ( he replaced it three times ) an abs pump replaced plus the brake booster checked. He says he also put 2 quarts of Brake fluid through the system, Still have the soft brake pedal. Any thoughts
Jan 15, 2014 at 1:48 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Make sure that the pads are sitting correctly in the callipers and that the calliper slide pins are not seized, if this is only after fitting pads I would be checking this first.
Jan 15, 2014 at 2:49 PM
Avatar
FORE1NCE
  • MEMBER
  • 2 POSTS
checked and rechecked the pads and sliders their o.k.
Jan 20, 2014 at 11:34 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Try a vacuum bleed rather than a conventional pressure bleed, there may be an air lock in the system still.
Jan 20, 2014 at 12:13 PM