Disconnect negative battery cable. Disengage 2 push pins retaining instrument panel insulator to instrument panel. Detach courtesy lamp from panel insulator. Working from under instrument panel, remove 2 screws and metal cover from evaporator housing. Remove blend door actuator electrical connector from bracket on A/C evaporator housing.
Remove 3 blend door actuator screws. Lift actuator vertically approximately 1/2" (12 mm) to disengage it from bracket and actuator shaft. Pull actuator back toward passenger compartment to complete removal. The mounting bracket remains in place on the A/C evaporator housing.
To install, reverse removal procedure. After actuator is installed, disconnect positive battery cable. After 30 seconds, reconnect cable to terminal. Actuator adjustment will be automatic
check for a vacuum leak first as these are vacuum controlled....
Dec 10, 2013 at 6:05 AM
