Injectors not pulsing? and no power to the fuel pump/relay

1997 ISUZU RODEO
200,000 MILES
Avatar
NCKIOLB
  • MEMBER
  • 2 POSTS
On my way home from washing the motor down after replacing the waterpump, It just suddenly died. After getting it home, I checked the fuel pump and I'm getting no power. I checked the fuses and the relay. I'm also not getting any power to the fp relay when placing the key in the "on" position. I would spray starter fluid and it would run shortly so I'm getting spark. I then jumped the fp relay just to prime the motor to see if I could get it to run and it still wouldn't start. I have replaced the computer and still does the same thing. I checked the key ignition harness and it seems alright. I'm on the brink of torching this thing. Any help would be much appreciated.
Mar 3, 2012 at 8:38 PM
Advertisement
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
any engine sensors in area you washed? how did you wash it?
Mar 3, 2012 at 8:44 PM
Avatar
NCKIOLB
  • MEMBER
  • 2 POSTS
pretty much washed everything with a pressure washer. it's been sitting for about 6 months now and i just got it running. let it idle about 20min and it ran very well. i went to put it in gear and drove about 10 feet and died. checked the fuses and the 15a "engine device" fuse was blown. i replaced it and it fired back up. and went to put it in reverse and it blew. now as soon as i put the key in the "on" position it blows. why would it be doing this now?
Mar 3, 2012 at 9:45 PM
Advertisement