I have a 1996 nissan sentra and it is leaking oil at the front main bearing seal. must I pull the engine to replace it
Feb 17, 2011 at 1:41 AM
main seal replacment
1996 NISSAN SENTRA
P BOE
- MEMBER
- 1 POST
- FOLLOW
Advertisement
No, it is not required. This is a minor job with a book time of 1 hour.
FRONT COVER OIL SEAL
Removal & Installation
1. Remove accessory drive belts. Remove intake air duct. Remove right front wheel and splash shield, if necessary. Remove engine undercovers. Remove right engine side cover. Remove crankshaft pulley bolts. Remove crankshaft pulley.
2. Using screwdriver, pry out oil seal from front cover. Apply oil and install seal into front cover. To complete installation, reverse removal procedure.
© 2008 Mitchell Repair Information Co., LLC.
FRONT COVER OIL SEAL
Removal & Installation
1. Remove accessory drive belts. Remove intake air duct. Remove right front wheel and splash shield, if necessary. Remove engine undercovers. Remove right engine side cover. Remove crankshaft pulley bolts. Remove crankshaft pulley.
2. Using screwdriver, pry out oil seal from front cover. Apply oil and install seal into front cover. To complete installation, reverse removal procedure.
© 2008 Mitchell Repair Information Co., LLC.
Feb 24, 2011 at 2:42 PM