Chilton manual says it's under the drivers seat. It is not oh this 1996 4 wheel drive model. I get code "16", "system OK" The issue I'm having is the ABS motor runs continuous while key is in the run position, and or engine is running. I have checked all connections except the module.
I can remove the 40 amp fuse/circuit breaker(located in fuse box, passenger side front inter fender) and the ABS motor will stop running, I still have working brakes.(NO ABS) However I cannot put this vehicle "in service" w/out "working" ABS. This would leave me liable.(VERY UNSAFE) I have informed owner of tests and code readings and advised owner that vehicle not be put "in service" until issue is resolved. Thank you. Bill
I can remove the 40 amp fuse/circuit breaker(located in fuse box, passenger side front inter fender) and the ABS motor will stop running, I still have working brakes.(NO ABS) However I cannot put this vehicle "in service" w/out "working" ABS. This would leave me liable.(VERY UNSAFE) I have informed owner of tests and code readings and advised owner that vehicle not be put "in service" until issue is resolved. Thank you. Bill
Mar 19, 2012 at 6:02 PM
