how do i remove the passenger side door panel 1996 lexus es300

DOOR INSIDE HANDLE (FRONT)
Removal
Remove the 3 screws. See Fig. 41 .
Disconnect the 2 links from the handle.

DOOR TRIM (FRONT)
Removal
Remove the cap and screw.
Remove the 2 cap and clips.
Remove the cap and screw.
Insert a screwdriver between the panel and door trim and remove the 4 clips.
NOTE:Tape the screwdriver tip before use.

Pull the trim upwards to remove it. See Fig. 43 .

WINDOW REGULATOR
Removal
Remove the 8 nuts and regulator. See Fig. 50 and Fig. 55 .
NOTE:Apply MP grease to the sliding surface and gears of the window regulator. See Fig. 51 and Fig. 56 . Do not apply MP grease to the spring of the window regulator.

Disconnect the connector.
NOTE:The screws and cover plate can be used again.

To replace the regulator, (screw type) remove the 2 screws and remove the cover. See Fig. 52 .
CAUTION:Do not damage the motor housing.

NOTE:Tape screwdriver tip before use.

NOTE:The cover plate is not reusable.

(Crimped type) Using a screwdriver, pry up the cover plate tab and remove the cover plate. See Fig. 53 .
CAUTION:Do not use a screwdriver etc. to help remove them.

Remove the drum and wire guide from motor. See Fig. 54 .