stuck tramission on clutch job

1996 HYUNDAI ACCENT
219,000 MILES
Avatar
EREDY
  • MEMBER
  • 2 POSTS
i have everything off the b,olts from the transmission also,but it wont move off from the motor . i was wondering how can i get the transmission off from the motor? i read it says to remove the bolts from trans-axel is that the second set of bolts you see not connected to the motor
Mar 4, 2012 at 10:07 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
No you only want to remove the ones hooking the transmission to the engine.Have you removed the starter bolts?Sometimes the starter bolts go thru the transmission and into the engine.Or thru the engine and into the transmission.
Mar 4, 2012 at 10:13 PM
Avatar
EREDY
  • MEMBER
  • 2 POSTS
yes only the ones to the motor even the starter bolts .i think either i left it in gear or the clutch was so bad it hangs the throw out bearing these Hyundai are tricky how you put a clutch kit back on. no matter what i try a pry bar from all sides or i kick it to jar it off those pins that has nothing works.only moves a inch or two like its hung .i read you could go threw the gears it didn't work.
Mar 5, 2012 at 3:40 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Also a rusty dowl pin could hold it up try spraying the dowl pins with penatrant and letting it soak.
Mar 5, 2012 at 4:11 AM