1996 Honda Civic manual transmission stick stuck after

1996 HONDA CIVIC
150,000 MILES • 4 CYL • FWD • MANUAL
Avatar
PINETREE175
  • MEMBER
  • 2 POSTS
After I changed the throw out bearing and plate ...I reassembled the Trans mission ......

Before I changed the transmission I could move the stick through the gears ......after I changed the transmission the stick will not move........

Any advice would be helpful
Feb 5, 2015 at 11:33 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
make sure your linkage was reconnected and not bent in process of trans removal check at both ends. we have no pics of it.
Feb 5, 2015 at 4:30 PM
Avatar
PINETREE175
  • MEMBER
  • 2 POSTS
Thank you for responding......I will take the pictures and post them tmw.....as far as linkage.....from the stuck to the transmission it's 2 bars......both connected to the stick and transmission......as far as knowing where the linkage Is ....I'm clueless.... would it be behind transmission connecting to the 2 bars that run back to the stick?.........once again THANK YOU and I will put the pictures of the transmission up tmw
Feb 5, 2015 at 4:42 PM
Advertisement