Only the drive's door switch does anything and that switch will only lock the doors, not unlock them. None of the other switches do anything.
The 96 has a sliding passenger door and the only other switch is on the front passenger's door.
I removed the rear door lock motor and applied 12volts to ground through it's terminals in both directions. The motor worked both ways.
I have a wiring diagram for the power locks from a 97 Econoline, if that helps.
Thanks,
-Larry-
The 96 has a sliding passenger door and the only other switch is on the front passenger's door.
I removed the rear door lock motor and applied 12volts to ground through it's terminals in both directions. The motor worked both ways.
I have a wiring diagram for the power locks from a 97 Econoline, if that helps.
Thanks,
-Larry-
Nov 25, 2011 at 4:55 PM
