1996 Ford F-150 Code P0443

1996 FORD F-150
194,500 MILES • 4.9L • 6 CYL • 2WD • MANUAL
Avatar
ROBERTMOORE934
  • MEMBER
  • 10 POSTS
This code appeared OBDII system. I know this involves a malfunctioning canister purge solenoid. However, I cannot find it on this truck. I have looked at diagrams, but it is not in the same location. I notice that this was the first year and only year for these model trucks to have OBDII. I did find a valve that runs from the carbon canister but its completely different. I really need some insight on where this solenoid is.

The part I got is a BWD CP130, is this the right one?


Thank You!
Dec 6, 2014 at 5:31 PM
Advertisement
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
SEE ANYTHING LIKE THIS IN AMONGST THE OTHER STUFF?

http://shop.advanceautoparts.com/web/PartSearchCmd?storeId=10151&catalogId=10051&pageId=partTypeList&suggestion=&actionSrc=Form&langId=-1&searchTerm=canister+purge+solenoid&vehicleIdSearch=32243&searchedFrom=header

THE MEDIC
Dec 6, 2014 at 6:23 PM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
I CAN TOP YOU!

I WENT UP A YEAR AND SELECTED THE 4.6L

http://shop.advanceautoparts.com/p/bwd-vapor-canister-purge-solenoid-cp516/20470249-P?searchTerm=canister+purge+solenoid

THIS IS WHERE I HAVE YOU!

https://www.2carpros.com/questions/2001-dodge-neon-milage-just-want-put-fliuds-their-locations

IF YOU BOUGHT IT AT "ADVANCE AUTO" OR WHERE EVER, TAKE IT BACK FOR A REFUND

THEN READ THIS,

STICK IT IN YOUR CART AND PICK OUT SOMETHING ELSE FOR JUST OVER $3.01 STICK IT IN YOUR CART TOO, YOU SHOULD BE JUST OVER $70

TRY A "TEST RUN" OR TWO ON THE PURCHASE, BEFORE YOU USE MR. CREDIT CARD

BUY IT ONLINE, PICK UP AT STORE, (IN 30 MINUTES) IF THIS STILL WORKS, I SAVED YOU $25

PUT THIS SAVINGS IN A JAR, SO YOU CAN SAVE UP FOR A JEEP SOON!

WHAT A DEAL!

THE MEDIC
Images (Click to enlarge)
Attached Media
Attached Media
Dec 6, 2014 at 6:50 PM
Advertisement
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
WELL?

OTHER THAN LOOKING LIKE SOME KIND OF ARTILLERY PIECE

IF IT LOOKS IDENTICAL, I'D SAY IT'S THE RIGHT PART

YOUR TURN

THE MEDIC
Dec 6, 2014 at 7:03 PM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
OKAY

A LITTLE EAGER ON THIS END

HAVE YOU FOUND ANY OF MY 1ST PARTS OR THE "LAST ONE" ON THE TRUCK YET?

THE MEDIC
Dec 6, 2014 at 7:06 PM
Avatar
ROBERTMOORE934
  • MEMBER
  • 10 POSTS
No, I see the part listed, but cannot find it anywhere. This truck was the start of OBDII, so maybe the emissions system is a little different from the previous ones.
Dec 7, 2014 at 9:38 AM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
DON'T GIVE UP ON ME!

LOTS GOING ON TODAY

FUNERAL, GRAND-MONSTERS, SLAVE DRIVER, ETC

I'M GONNA TRY TO FIND A DIAGRAM IN "PRODEMAND", SOON AS SHE LET'S ME HAVE A LONGER BREAK!

THE MEDIC
Dec 7, 2014 at 5:34 PM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
I HAD A LITTLE TIME TODAY

I HAVE NOT FOUND A DIAGRAM OF THE REAL DEAL

THE CLOSEST I CAME, WERE TWO "TYPICAL" DRAWINGS (NO LOCATIONS)

HOWEVER, LOOKING AT THEM, BASICALLY START AT THE CANISTER AND FOLLOW THE LINES TILL YOU BUMP INTO THE CREATURE

I'LL MESSAGE ANOTHER 2CARGUY AND SEE IF HE CAN ADD TO THIS

THE MEDIC
Dec 8, 2014 at 7:21 PM
Avatar
ROBERTMOORE934
  • MEMBER
  • 10 POSTS
Thank You!
Dec 8, 2014 at 7:27 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
the first pic you sent is correct the guy is probably looking for a sensor not a solenoid which it is. I've sent a location for him to look at if you want to send this along as well. It may be mounted close to the frame.
Image (Click to enlarge)
Attached Media
Dec 18, 2014 at 5:47 AM