a/c heater blend door actuator location

There are two style of blend doors one of them is right on top of the heater plenum. Here is a guide that will show you how to do it with diagrams below to show you on your car.

https://www.2carpros.com/articles/replace-blend-door-motor


TEMPERATURE BLEND DOOR ACTUATOR
Removal
Disconnect negative battery cable. Remove instrument panel. See INSTRUMENT PANEL. Remove 4 temperature blend door actuator screws. Remove actuator from top of evaporator case.

(DIAGRAM BELOW)

1 18471 Heater Air Plenum Chamber
2 18A317 Vacuum Control Motor
3 18C433 Heater Outlet Floor Duct
4 389975-S2 Nuts
5 18A478 Windshield Defroster Door
6 - Windshield Defroster Door Crank Arm


Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.

i need to know where the blend door actuator for ac/heat is located

It is located on the top of the HVAC housing and the dash has to be removed to access it. ]

thank you :)

I need to replace my blend door actuator on my 1996 Ford Crown Victoria but do not not know if i have manual or automatic air controls and they are sold as such, can you tell me how to distinguish between the 2 ? Thanks

he manual controls will have switches for the heat and another for the fan speed. The automatic system is more of a mini-computer that controls itself.

thanks