1996 Ford Crown Victoria Air ride suspension

1996 FORD CROWN VICTORIA
120,000 MILES • 4.6L • V8 • AUTOMATIC
Avatar
DESALVO
  • MEMBER
  • 2 POSTS
I have a problem with my air suspension. Once we got done working on my car. I turned the switch back on to lift the car up. When I was looking at it, it was really low. After we tried everything I also noticed the air suspension light on but no check engine light on. I'm like that's odd. So what do I do first or start with cause I do not want this to turn into a money pit. Any advice will help.
Aug 15, 2015 at 6:28 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Did you lift the vehicle when the suspension was still turned on? Have you checked fuses?
Aug 15, 2015 at 7:53 PM
Avatar
DESALVO
  • MEMBER
  • 2 POSTS
Yes I Checked the 2 fuses under the hood and the one in the car. I always turned the switch off before we jack it up. Now I'm just woundering how to test the compressor or locate the ride height sensor. Any information to take the next few steps into solve the problem will help. Thanks again.
Aug 15, 2015 at 8:16 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Here is a layout of the system. I found it on the net. Let me know if it helps. NOTE: Check to make sure the height sensor is getting power and functioning.
Image (Click to enlarge)
Attached Media
Aug 15, 2015 at 8:35 PM