1996 Chrysler Town and Country 4th gear won't engauge

1996 CHRYSLER TOWN AND COUNTRY
200,000 MILES • 3.8L • V6 • 2WD • MANUAL
Avatar
ESPACIOTIJ
  • MEMBER
  • 1 POST
Minivan drives fine from 1st to 3rd gear, but only revs and fails to get to 4th gear. If I manually select 3rd, It will drive fine (of course it won't get to 4th). Trannie was rebuilt about 18,000 miles ago, having changed solenoid pack and turbine. Any ideas as to what could be wrong? I've heard just having wrong oil in this transmission can cause it to fail. Could that be a contributing factor, too?
Feb 25, 2015 at 7:30 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
some oils can eat the glue off the clutch plates if the wrong type. have a trans guy check this it may be a bad converter. if they did it they may warranty it.
Feb 26, 2015 at 5:41 AM