after changing the automatic transmission in my Chevy 4x4, the starter relay fuse keeps blowing....why?

1996 CHEVROLET TRUCK
Avatar
PAPA JIM
  • MEMBER
  • 6 POSTS
the transmission broke into two peices and after changing it the starter relay fuse keeps blowing. I never disconnected the starter,just the battery.
Dec 28, 2011 at 7:54 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
check the wires at the starter and make dire nothing is touching the block. make sure no wires are caught in the bell housing as well.

Roy
Dec 28, 2011 at 7:59 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Inspect all wiring underneath could be a pinch wire that's causing a direct short to ground thats blowing the starter relay fuse-when the tranny was replaced-
Dec 28, 2011 at 7:59 PM
Advertisement
Avatar
PAPA JIM
  • MEMBER
  • 6 POSTS
done all that and still can't figure the problem out. I have two mechanics and alot of my friends trying to figure out the problem also.
Dec 28, 2011 at 8:06 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check what else is involved with the starter relay circuit
Dec 28, 2011 at 8:12 PM