with new plugs it runs for a little while

1996 CHEVROLET CAMARO
135,000 MILES
Avatar
ELVIS ARON
  • MEMBER
  • 6 POSTS
i have a 1996 camaro z28 with the ls1 in it i changed the spark plugs in it and it ran fine for a little bit but now it wont start but it will crank over and it back fires when it tries to start what can it be ? I changed the spark plugs they had carbon on them, after changing them it started right up drove it about 20 miles turned it off and let it sit for 2 days and now it wont start up. But it will crank up and it backfires when it tries to start do u think it could be the timing, or the opti spark that went out?
Jan 16, 2012 at 3:05 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check the fuel pressure with a gauge if okay-check for spark
Jan 16, 2012 at 3:15 AM
Avatar
ELVIS ARON
  • MEMBER
  • 6 POSTS
it is sensinf a code that says ignition misfire or malfunction
Jan 16, 2012 at 4:28 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
What is the exact code its giving-
Jan 16, 2012 at 4:31 AM
Avatar
ELVIS ARON
  • MEMBER
  • 6 POSTS
the code is p1371 and says manafactor ignation system or system mifire
Jan 16, 2012 at 4:41 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
P1371

Try changing the Ignition Control (IC) Module you are getting 4x Reference too few pulses
Jan 16, 2012 at 9:31 AM
Avatar
ELVIS ARON
  • MEMBER
  • 6 POSTS
So I need to change the ignition module then
Jan 16, 2012 at 3:20 PM