1996 acura tl Distributor cap

1996 ACURA TL
150,000 MILES • 2WD • AUTOMATIC
Avatar
MANNNY76
  • MEMBER
  • 25 POSTS
Hi there, I have a 1996 acura tl 2.5 I'm having a problem to remove my distributor cap I already remove the srews but it wont come out, there is no space between the wall and the head cap so if you can please tell me if there is something else that I need to remove so I remove the distrubutor cap
Feb 6, 2011 at 11:21 PM
Advertisement
Avatar
BILLYMAC
  • CERTIFIED EXPERT
  • 2,204 POSTS
remove the valve cover it will give you enough room
Feb 7, 2011 at 1:19 AM
Avatar
MANNNY76
  • MEMBER
  • 25 POSTS
I did remove valve cover but still there is not enough room
Feb 7, 2011 at 2:56 AM
Advertisement
Avatar
BILLYMAC
  • CERTIFIED EXPERT
  • 2,204 POSTS
could you possibly send pic of the cap and it's surroundings. sorry but not able to find . ty billymac
Feb 7, 2011 at 8:55 PM
Avatar
GEORGE HAYES
  • MEMBER
  • 2 POSTS
It's best just to remove the distributor, there is no wiring. There are 2 12mm headed bolts, there's not much room for the pass side bolt. The other side is easy, it's on top just below the valve cover. I used a deep offset boxend for the hard one. The heat shield makes it hard.
Dec 15, 2022 at 8:40 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Excellent addition to this thread! Please feel free to use 2CarPros anytime!
Dec 16, 2022 at 11:41 AM
Avatar
GEORGE HAYES
  • MEMBER
  • 2 POSTS
Thanks, I drive a 96 TL 2.5, those G series engines are pretty rare. Just the Vigor and early TLs had them. I got it dirt cheap needing an expensive Harmonic Balancer. But they make enough power for me. My boy racer days are over. Please notify me if any questions about them pop up. Good site!
Dec 16, 2022 at 12:01 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Will do! Yep, the racer days are behind me as well. :)
Dec 16, 2022 at 12:34 PM