1995 Toyota Tacoma replace crankshaft pulley

1995 TOYOTA TACOMA
156,000 MILES • 2.4L • 4 CYL • 2WD • MANUAL
Avatar
ALISSAW
  • MEMBER
  • 1 POST
the three pulleys in a row in front of crankshaft,the last one closest to motor wobbles and squeaks when i turn on head lights (or rainy,humid day) auto zone said harmonic balancer looked up online for part and found a single pulley and a triple pulley.i have the triple but can u replace just that last one or do i buy the triple?and how hard is it to put on?
Images (Click to enlarge)
Attached Media
Attached Media
Apr 14, 2014 at 8:42 PM
Advertisement
Avatar
OBXAUTOMEDIC
  • CERTIFIED EXPERT
  • 3,711 POSTS
Hello,

OK, the Harmonic Balancer comes as a unit, you cannot replace just one pulley on it.

As far as replacing it, it can be a job if you have never done one... The Radiator would have to be removed in order to have enough room to get to the bolt on the balancer, it is very tight and the easiest way to get it off is with an Impact Wrench. After that some will just pull off others will take a puller.

Hope this helps

Mark
Apr 15, 2014 at 4:58 AM