repair

1995 SATURN SL2
103,542 MILES
Avatar
1995SATURNSL2
  • MEMBER
  • 1 POST
where can i locate my knock sensor on my 1995 saturn sl2, what tools do i need to take it off? Also what is the location of the EGR valvue and what tool? Also what tool do i need to take off the HIGH and LOW end of my AC off the compresor to replace o rings?
thank you
Jul 1, 2011 at 5:30 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Why are you replacing the knock sensor that is a very uncommon part to fail?The knock sensor is under the intake manifold area screwed into the engine block sticking straight up.I don't remember what size socket it takes like i said haven't changed many bad ones.The egr valve is over by the throttle body sticking straight up the is two 10mm bolts holding it on.Again why are you changing it what codes do you have?As far as the a/c lines on the compressor if the a/c charge has been recovered by a a/c machine there 13mm bolts holding the lines on.Its real common on those cars for the low side line to pop when you charge them up because the low side runs real close to the exhaust manifold and bakes them.
Jul 1, 2011 at 3:46 PM