Jeep fuel system

1995 JEEP WRANGLER
115,000 MILES • 4 CYL • 4WD • AUTOMATIC
Avatar
JAYFORBES
  • MEMBER
  • 2 POSTS
I have 1995 Jeep Wrangler with a 2.5L 4 cylinder. When cold Jeeps fuel pump will not come on to pressurize system. If you sit and crank the engine until the battery is almost dead the relays start to click. When the relays stop clicking, you can hear the fuel pump kick in and pressurize the system. Wait about 60 seconds and it will start right up. Fuel pump and filter are new. Battery new. When it starts it runs perfect, smooth idle, no hesitation. Had alternator checked, 4 Passes in a row. Have run out of ideas.
May 16, 2011 at 5:55 PM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
It sounds like you have an issue with the ASD relay or one of the power supplies going to it.
May 16, 2011 at 7:02 PM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
This is how you get them corralled back where you want 'em!

jayforbes, they way this works is: Ask a question, the answer will come back to the same location!

Your other question is sorta being ignored, when/ if you reply, do it right below our answers.

The ASD RELAY (automatic shutdown relay) is located in the PDC (POWER DISTRIBUTION CENTER.......That would be a fusebox dealee, under the hood, generally inside the top of the cover is a "Legend", as to what's what in the box!

Were still here

Keep us informed

The Medic
May 17, 2011 at 12:08 AM
Advertisement