we redone a head on a honda and it gets fire though the plugs and it's got good fuel pressure but it just won't start what could be the problem.
Jan 28, 2011 at 8:42 PM
Advertisement
KHLOW2008
CERTIFIED EXPERT
41,814 POSTS
1. Low compression. Get the compression tested. If it is low, pump some engine oil into cylinders via the spark plug holes and crank engine for a few seconds without the spark plugs and retest.
2. Timing belt installation.
3. Ignition timing.
4. Firing order. Ensure plug wire are routed correctly.
5. Fuel problem. Check fuel pressure and ensure te injectors are pulsing.
6. Grounding circuit. Ensure the ground connection at thermostat housing is secure.