Which should be top dead center?
Sep 16, 2011 at 7:17 PM
What position should the rocker arms be in when re-assembling
1995 FORD TAURUS
TERRILYNN
- MEMBER
- 1 POST
- FOLLOW
Advertisement
I'm not sure what you are doing, but if it is setting the timing, there is a mark on the camshaft gear that will need aligned. The same with the crank.
As far as your question, at TDC, the #1 cylinder lobes on the cam should be the farthest away from opening the valves as they can. If this is a timing issue, use the timing marks.
As far as your question, at TDC, the #1 cylinder lobes on the cam should be the farthest away from opening the valves as they can. If this is a timing issue, use the timing marks.
Sep 17, 2011 at 4:42 AM