1995 Ford Probe transmission

1995 FORD PROBE
251,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
SFCKROH2002
  • MEMBER
  • 2 POSTS
Transmission has no gears forward or reverse,.... I disconnected the battery for about 5 mins. Reconnected battery had all gears til the Probe got to operating Temp. Then had no gears forward or reverse...The fluid is full, and also the O/D light flashes...Please Help....
Apr 11, 2014 at 7:30 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
The first thing I would do is read the codes with a scan tool that a your best bet.They also have a flash box to retrieve codes.You could have a electrical component failing or a internal component seal etc.Reading the codes would be a good starting point. then depending on what we find we may have to do a transmission pressure test.
Apr 12, 2014 at 5:53 AM
Avatar
SFCKROH2002
  • MEMBER
  • 2 POSTS
went to start my Probe this AM had all gears for a couple of mins. I went from Drive to Reverse a couple of times then Nothing...No Gears at all...Still has Fluid ,,,,, do you think the transmission linkage Pin is Slipping?? should I replace it??....Thanks for your Time....David
Apr 12, 2014 at 6:45 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Thats easy to check have someone shift it while you watch the linkage.Sounds more like a internal failure or electrical component because you mentioned temp makes the gears inop.Thats why I suggested checking codes first.
Apr 12, 2014 at 3:07 PM