I have replaced the booster,master cylinder,abs pump and still do not have good brakes. The system has been bleed several times
Jan 22, 2015 at 4:17 PM
Advertisement
CADIEMAN
CERTIFIED EXPERT
3,544 POSTS
CHECK THE VACUUM IS IT 18" AT LEAST IF NOT U WILL NEED TO REPLACE THE VACUUM CANISTER OR INSTALL ONE IF U DON'T HAVE ONE.
Jan 22, 2015 at 4:37 PM
FIREDOG68
MEMBER
3 POSTS
I used a mighty mite on the vacuum canister last night pulled to 25" it was on 20" this morning. am I correct in thinking that it is OK?
Jan 24, 2015 at 8:50 AM
Advertisement
CADIEMAN
CERTIFIED EXPERT
3,544 POSTS
THAT VACUUM IS GOOD. U MAY TO HAVE THE SYSTEM PRESSURE BLEED TO GET ALL THE AIR OUT.U CAN'T DO IT BLEEDING BY FOOT. ALSO DID U BLEED THE MASTER CYLINDER?
Jan 24, 2015 at 10:18 AM
FIREDOG68
MEMBER
3 POSTS
I bench bled the master cylinder and have bled the system by vac and by foot the last time it was by foot but I will bleed it by vacuum again.
Jan 24, 2015 at 10:50 AM
CADIEMAN
CERTIFIED EXPERT
3,544 POSTS
REBLEED THE MASTER CYL. MAKE SURE BOTH FITTINGS GIVE A GOOD SQUIRT WHEN YOU PUSH THE PEDAL TO THE FLOOR.DO IT ON THE TRUCK.