1995 FORD BRONCO
125,000 MILES
Avatar
JVILL1322
  • MEMBER
  • 4 POSTS
i have a 1995 ford bronco and my breaks wont work ive replaced the front rotors, calibiers, pads, as well as the rear drums and shoes, ive also replaced the master cylinder and the booster and i still have no breaks. what the problem?
Oct 28, 2012 at 7:11 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
did you have it pressure bled to rid it of air??

what was the original issue???

Roy
Oct 28, 2012 at 7:14 PM
Avatar
JVILL1322
  • MEMBER
  • 4 POSTS
i was just replacing my breaks and i just bled them when i put the new ones on .
Oct 28, 2012 at 7:27 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
so you had brakes prior to this repair????

start with pressuring bleeding system

Roy
Oct 28, 2012 at 7:28 PM
Avatar
JVILL1322
  • MEMBER
  • 4 POSTS
yes i did but they where really bad and need to be replaced. ok and how would i do that do i have to take it to a shop?
Oct 28, 2012 at 7:30 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
you can rent the bleeder from a parts store.

Roy
Oct 28, 2012 at 7:32 PM
Avatar
JVILL1322
  • MEMBER
  • 4 POSTS
ok some told me that it might be the abs hydrolic unit but the one the sold me at autozone looks nothing like the original? could the old one be the problem
Oct 28, 2012 at 7:34 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
stop throwing parts at it that were fine before the repair.

start with basics and get the system properly bled.

Roy
Oct 28, 2012 at 7:35 PM