one screw in fuel pressure regulator....truck will not start after back together

1995 CHEVROLET S-10
150,000 MILES
Avatar
MMTHOENE
  • MEMBER
  • 1 POST
replaced fuel pressure regulator on a 4.3 v6 vortec 95 chevy s10...when doing so the top piece(where top screw goes) on boss mount broke...the regulator is still secured in mount with bottom screw..orface in right spot....put truck back together now no start....lots of fuel smell...????is the regulator the problem...even though it is secure and doesn't move
Sep 19, 2012 at 10:45 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check your fuel pressure that will tell you is it vacuum or mechanical, if it'smechanical good chance it's no good from being broken
Sep 19, 2012 at 10:58 PM
Avatar
MMTHOENE
  • MEMBER
  • 1 POST
i can only do that with the machine you rent from auto store yes....or?????????????
Sep 19, 2012 at 11:02 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
unless you have on eat home yes you'll have to rent it
Sep 19, 2012 at 11:03 PM