galant clutch

1994 MITSUBISHI GALANT
22,450 MILES • 6 CYL • 4WD • MANUAL
Avatar
MY68U
  • MEMBER
  • 4 POSTS
hey mate i just got a new clutch put in less than 2 weeks ago. machined the flywheel and full cluch kit and ive just replaced the master cylinder, and a couple of times i couldn't push the clutch in, (it was jamming) note this was before i changed the master,as i was bleeding the clutch through the master it jammed again but eventualy something gave way and now there is no clutch at all? could this have happend due to the cluch not being put in properly or something else please help
Nov 27, 2010 at 10:17 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
If the pedal will depress with the bleeder open i feel ther may be a problem with the clutch assembly, but this is very rare, this should be check by a mechanic first as it should be seen first hand to help understand the exact problem.

mark (mhpautos)
Nov 27, 2010 at 10:20 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check the clutch slave/servo
Nov 27, 2010 at 10:20 PM
Advertisement
Avatar
MY68U
  • MEMBER
  • 4 POSTS
thanks for the reply, the i am getting the mechanic who put it in to look at it and fix it i just wanting to determine if he is responsibe as every thing is new so i figuered its must not been put in properly as it has dne it a few times now
Nov 27, 2010 at 10:32 PM
Avatar
MY68U
  • MEMBER
  • 4 POSTS
they were supose to look at the slave when they did the clutch but didnt
Nov 27, 2010 at 10:34 PM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
As rasmataz has said, if they have not done the slave, get it replaced as well.

Mark (mhpautos)
Nov 27, 2010 at 10:37 PM
Avatar
MY68U
  • MEMBER
  • 4 POSTS
yip was brought the slave and gona put it in when this happend lol
Nov 27, 2010 at 10:44 PM