I have another question about a mazda b 2300 1994 2.3 liter.I'll try to explain this the best I can. The other day I jacked up the left front wheel and I noticed that the camber was positive by a large amount.In other words,the tire was out at the top by a large amount.The right front tire which was still on the ground was also tilted out at the top as well.When I turned the left wheel (still jacked up) from side to side the the tied rod end joints rotated from side to side on each tire.Now I know you have a pivot axle bushing ( or is it a camber caster bushing??) on the top of the axle that is held is by a bolt and you have a lower ball joint on the bottom as well as a pitman arm boot that inserts thru the passenger side inner tie rod.What should I do?? thanks for your help,Steve