1994 mazda 626 lx 2.0

1994 MAZDA 626
4 CYL • 2WD • AUTOMATIC
Avatar
K.JOHNSON63
  • MEMBER
  • 1 POST
i have a 1994 mazda 626 lx 2.0 that is getting no fire/current at distributor plug when turning the key in all positions. Have replaced all fuses and relays in fuse box to no avail. Can anyone tell me if there is a fuse/relay to check or test or could it be the electrical part of the ignition switch that is causing me all the problem. Your help would be greatly appreciated!!!
Dec 6, 2010 at 1:26 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Ignition coil receives its power supply direct from the ignition switch. At ignitio switch test the Black/White wire for battery voltage when ignition is turned ON and while cranking. If battery voltage is not available, the ignition switch is faulty. If voltage is available but not getting to the ignition coil, there is an open in the circuit.
Dec 7, 2010 at 5:52 PM