1994 Ford Ranger fuel injection

1994 FORD RANGER
150,000 MILES • 4.0L • V6 • 2WD • AUTOMATIC
Avatar
CWEBRIC2
  • MEMBER
  • 3 POSTS
i removed and cleaned injectors and had to replace 3 of them which i put on the drivers side, then reinstalled 3cleaned and tested injectors on the passenger side,the three injectors will not work on the passenger side if i put them on the drivers side they work, i need to know why they dont work on the passenger side and what do i need to do to get them to work
Jun 14, 2014 at 6:14 PM
Advertisement
Avatar
RACEFAN966
  • CERTIFIED EXPERT
  • 5,029 POSTS
did they work before? have you checked for power to the injectors on that side? Get back to me and we will go from there ok.
Jun 16, 2014 at 8:44 AM
Avatar
CWEBRIC2
  • MEMBER
  • 3 POSTS
They did work I actually had a stuck injector on drivers side, I have power if I take the red wire from a voltmeter and put it on the red wire of the injector power clip and take the black lead and ground it to the engine. Thank you for helping me!
Jun 16, 2014 at 9:14 AM
Advertisement
Avatar
RACEFAN966
  • CERTIFIED EXPERT
  • 5,029 POSTS
Do you have access to a noid light? If not they are not very expensive to buy just one. You unplug the injector and plug in the noid light and if it flashes then the computer and wiring is good, if not then we need to look deeper.
Jun 17, 2014 at 8:50 AM
Avatar
CWEBRIC2
  • MEMBER
  • 3 POSTS
Thanks for your help, I can borrow a noid light from a auto part store by just putting a deposit down, I'll let u know the results
Jun 17, 2014 at 12:19 PM
Avatar
RACEFAN966
  • CERTIFIED EXPERT
  • 5,029 POSTS
Sounds good let me know and we will go from there
Jun 18, 2014 at 8:34 AM