1993 Saturn SL2 Vacuum line connection

1993 SATURN SL2
140,000 MILES • 4 CYL • FWD • MANUAL
Avatar
FORDFALCON54
  • MEMBER
  • 1 POST
Tried to clean my throttle out and as I was taking it out I accidentally cracked the vacuum line. Anyway I got two out of the three put back together the one I'm stuck on is the solenoid vacuum connection. I don't know where the solenoid is located in my car. I have the basic diagram but it doesn't help me very much so if I could get a better diagram that would be amazing and greatly appreciated and from what I've seen so far I'm suppose to connect it to the top nipple not the bottom one on the solenoid correct?
Jan 30, 2014 at 6:01 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Its the top and its under the intake manifold if your looking for the canister purge solenoid.
Jan 30, 2014 at 6:15 PM
Avatar
MLDANIELS2000
  • CERTIFIED EXPERT
  • 227 POSTS
I can get a vacuum diagram but need an engine size.
Jan 30, 2014 at 6:54 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Really dont need a vacuum diagram for that car there isnt many lines and there straight runs.Goes from the throttle body to the canister purge solenoid under the intake manifold. The other line goes from the throttle body to the egr solenoid mounted to the valve cover.Then the from the intake vacuum nipple goes to the pcv in the valve cover.
Jan 30, 2014 at 7:39 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Also those cars only have one engine size 1.9L that one is a dual overhead cam.They also made a 1.9L single cam engine same vacuum set up.
Jan 30, 2014 at 7:42 PM