How to install a universal starter switch.

1993 JEEP CHEROKEE
23,500 MILES
Avatar
RODEOCHIC48
  • MEMBER
  • 5 POSTS
Jeep will not start. replaced starter and battery cables. It has a new battery. turn key on, no start or clicking noise. I would like to bypass the ignition switch. cannot find wiring diagram for this model without buying really expensive repair manual, cannot afford this. How and where do I install the starter switch. model is a dorman 85935 universal starter switch. Any help would be appreciated.
May 1, 2012 at 9:57 PM
Advertisement
Avatar
FIXITMR
  • CERTIFIED EXPERT
  • 9,990 POSTS
is that just a big pushbutton with 2 connections?
May 1, 2012 at 10:08 PM
Avatar
RODEOCHIC48
  • MEMBER
  • 5 POSTS
Yes, it's the dorman model #85935 universal starter switch
May 1, 2012 at 11:47 PM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
You can't simply do that. This is a sophisticated electrical circuit that is likely integrated with an immobilizer security system that cannot be bypassed.
May 1, 2012 at 11:52 PM
Avatar
RODEOCHIC48
  • MEMBER
  • 5 POSTS
oh jeez.. any guesses? the starter was replaced and the battery cables along with the ignition lock cylinder. still won't start. any way to bypass the ignition switch? when i turned the key, there is no sound.
May 2, 2012 at 12:28 AM
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
Changing the ignition lock would have done nothing for the electrical circuit. Your problem may not even have anything to do with the ignition switch. There is also an early and late design with a relay that is operated by the PCM. Here are the diagrams but you need electrical knowledge to read them correctly. Early production design http://i1198.photobucket.com/albums/aa448/Wrenchtech/41824249.gif late design http://i1198.photobucket.com/albums/aa448/Wrenchtech/41814033.gif
May 2, 2012 at 12:34 AM
Avatar
RODEOCHIC48
  • MEMBER
  • 5 POSTS
Thank You so much. You have been most helpful. Hope you have a great night.
May 2, 2012 at 4:08 AM