1993 Honda Prelude Fuel Level Gauge/Speedo

1993 HONDA PRELUDE
Avatar
ORIAX123
  • MEMBER
  • 7 POSTS
Im trying to install a sunpro analog fuel level gauge but cant figure out what wire is for gauge sender. Also the speedo doesnt mark when im driving but lights come on and the use the same fuse 13 10A if im correct. Could be a short or a undone wire.
Jul 13, 2013 at 8:28 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Speedometer not functioning are usually due to a fault with the Vehicle Speed Sensor or its circuit.

The sender wire is Yellow/White
Image (Click to enlarge)
Attached Media
Jul 14, 2013 at 1:23 AM
Avatar
ORIAX123
  • MEMBER
  • 7 POSTS
I replaced the VSS and didn't work still, then I checked the voltage using a multimedia and gave no power at all. Now I know its a wire itself or a circuit that is fried, can you give me the diagram for the wires of the VSS? I know 1.)Ground 2.) 12v 3.) 5v
Sep 7, 2013 at 2:40 PM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
The colors are

1. Black = Ground
2. Black/Yellow = Dash fuse # 23 ( 12 V supply)
3. Orange = Meter

I have attached the diagnostic procedures which explains what wire to look for.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Sep 8, 2013 at 12:32 AM