1993 Chevrolet Truck four wheel drive not engaging.

1993 CHEVROLET TRUCK
140,000 MILES
Avatar
GRIERWOLFE
  • MEMBER
  • 2 POSTS
I have a 1993 ck1500 and the four wheel drive isn't locking in. The front wheels will not pull in nor does the light on the floor shift turn on? I was thinking probably my actuator but wanted professional advise. Thank you for your time.


Justin
Sep 7, 2013 at 10:17 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check to see if the actuator works when you switch to it. either with a test light or voltmeter.
Sep 7, 2013 at 11:54 AM
Avatar
GRIERWOLFE
  • MEMBER
  • 2 POSTS
I unplugged the actuator, started the truck, and put in 4 high. I crawled under the truck and put my volt meter into the incoming line and it show I have 12 vdc. I plugged it back in and tapped the outside of the actuator with the butt end of a screwdriver in case the fluid in it was gummed up. Didn't hear anything engage. I'm not quite sure what the other line is. Maybe a vac line?
Sep 7, 2013 at 2:11 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
sounds like you aren't getting the actuator to work they are like $100 on newere trucks may be cheaper for yours check prices.ther eis vacuum that goes to front axle.
Sep 7, 2013 at 3:29 PM