truck starts, but won't go into gear?

1993 CHEVROLET SUBURBAN
2WD • AUTOMATIC
Avatar
CZR1760
  • MEMBER
  • 49 POSTS
I had a broken flywheel on my 93 Suburban. After installing a new flywheel, the truck starts, but won't go into gear. Please let me know what I may have done incorrectly on the re-install. Thanks.
Feb 22, 2011 at 2:02 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

If you replaced the flywheel, was everything bolted properly on the torque converter? Was the torque converter fully engaged into the transmission front pump? It is keyed into the pump. I attached a pic of where I'm referring to.

Let me know.

Joe

See pic below.
Image (Click to enlarge)
Attached Media
Sep 27, 2021 at 7:55 PM